The Kelton ER Handles are the most versatile
handle system available. The system is comprised of
the ER32, the ER25, the ER16 and the Torque Arresting
1. The handles can be combined for numerous
combinations of length and weight with the following
exceptions: The ER32 and ER25 cannot be combined and
the ER16 does not accept a side handle. For example,
the ER32 + ER16 + TAH as an extension results in a total
handle length of approximately 870mm (34 1/4").
The ER16 + TAH results in a total handle length of 419mm
2. Torque Arresting Handle (TAH) may be used as a side
handle or an extension handle on both the ER25 and ER32,
or as an extension handle on the ER16.
3. The Torque Arresting Handle is not colleted but may
also be used as a small handle for tools with shanks
up to 9.5mm (3/8"). Tool shank is secured using
4. The ER32 and ER25 feature compartments for adding
weight if desired.
5. Uses universally available ER collets (Metric and
Imperial) for rapid, tool-less tool changes. These collets
have a clamping range capacity of about 1mm (.04").
However, the user should be aware that some manufacturers
identify their collets by actual range - i.e.
18-19 indicates that the collet will accommodatefrom
18mm to 19mm - while others use a single number - i.e.
19, which indicates the upper limit of the collet and
some others may possibly identify the collet by it's
mid-range using a single number - i.e. 19mm would accomodate
a shaft range of 18.5 - 19.5mm. Check the manufacturer's
specs and your tool size carefully when purchasing additional
6. Durable easy-grip handle covering provides a secure
comfortable grip that is especially beneficial for those
Please see the User
Guide for much more information on this unique handle
: Length: 508mm
(20"); weight compartment; accepts collets up to
19mm (3/4"); 15-16mm (5/8") collet provided.
: Length: 432mm
(17"); weight compartment; accepts collets up to
16mm (5/8"); 12-13mm (1/2") collet provided.
: Length: 280mm
(11"); accepts collets up to10mm (3/8"); 9-10mm
(3/8") collet provided.
: Length: 127mm
(5"); can be used as a side handle or extension
on the ER25 and ER32, or as an extension on the ER16;
can also be used as non-colleted handle for tools up
to 9.5mm (3/8") using the provided set screws.